2BYF Series Corn Planter with Fertilizer for 20-80HP Tractors

The BSM 2BYF series corn planter with fertilizer is designed for agricultural tractors from approximately 20HP to 80HP. It combines furrow opening, fertilizer application, seed placement, soil covering and pressing in one field operation.

The planter is suitable for corn, maize, soybean, sorghum and other crops using similar large seeds. Multiple configurations are available, including 2-row, 3-row, 4-row, 5-row and 6-row models.

Row spacing, seed spacing, planting depth and fertilizer application can be adjusted according to crop type, planting method, local farming conditions and customer requirements.

• Planting corn and maize
• Simultaneous seeding and fertilizer application
• Precision seed placement in prepared farmland
• Planting soybean and sorghum with suitable seed plates
• Opening planting furrows
• Covering seeds with soil after placement
• Pressing the soil to improve seed-to-soil contact

The planter is connected to the tractor through the rear three-point hitch. During operation, the ground wheels rotate and drive the mechanical seed-metering and fertilizer-metering systems.

The furrow openers create planting furrows at the required depth. Fertilizer is placed near the seed row, while the seed-metering units release seeds at the selected spacing.

After seed placement, the covering and pressing components close the furrow and compact the soil around the seeds. This process helps maintain a consistent planting depth and improves seed contact with the soil.

• Planting and fertilizing in one pass: The machine completes seed placement and fertilizer application during the same operation.
• Multiple row configurations: Models with 2, 3, 4, 5 or 6 planting rows are available.
• Adjustable row spacing: The planting units can be positioned according to crop and field requirements.
• Adjustable seed spacing: Seed spacing can be changed through the seed-metering configuration.
• Mechanical seed metering: The ground-wheel-driven system does not require tractor PTO power.
• Three-point mounted structure: The planter can be connected directly to compatible agricultural tractors.
• Separate seed and fertilizer hoppers: Seed and fertilizer are stored and delivered through separate systems.
• OEM service: BSM can customize the color, logo, row quantity and planting configuration.

Technical note: The matched tractor power above is a reference range. Final tractor matching depends on row spacing, total machine width, machine weight, soil resistance, fertilizer quantity, field slope and tractor lifting capacity.

The planter can complete fertilizer application and precision corn planting in one operation. Seed plates are selected according to seed size and required spacing.

With a suitable seed-metering plate and correct adjustment, the machine can be used for soybean planting.

The planting system can be configured for sorghum and similar large seeds, subject to seed size and planting requirements.

The best planting performance is achieved in fields that have already been ploughed, harrowed or rotary tilled.

A relatively level surface helps the planting units maintain stable depth and consistent seed placement.

The planter can work with a moderate amount of surface residue. Heavy or long crop residue should be chopped or cleared before planting.

Tractor selection should consider engine power, rear lifting capacity, tractor width, tire spacing, machine weight, number of planting rows and local field conditions.

A wider planter requires sufficient tractor lifting capacity and front-to-rear weight balance. Front counterweights may be required for larger 5-row and 6-row models.

The tractor tire spacing should match the planting-row arrangement to avoid pressing planted rows during operation.

Before field operation, the seed plate must be selected according to the crop and seed size. The seed-metering system should be tested manually to confirm that each unit releases seeds smoothly.

Fertilizer output should be calibrated before planting. Excessive fertilizer placed too close to the seed may affect germination, so the fertilizer position and application rate should follow local agronomic requirements.

Planting depth and seed spacing should be checked after a short trial operation. Adjustments should be completed before continuous planting begins.

• Check all bolts and three-point linkage pins before operation
• Clean seed and fertilizer hoppers before filling
• Select the correct seed plate for the crop
• Calibrate seed and fertilizer output before planting
• Keep a stable tractor speed during operation
• Avoid sudden acceleration and sharp turning
• Lift the planter before reversing
• Check planting depth and seed spacing regularly
• Remove remaining fertilizer after daily operation
• Clean and lubricate the transmission components

Completing planting and fertilizer application in one pass reduces repeated tractor travel, saves labour and shortens the field operation time.

The separate seed and fertilizer systems allow both materials to be delivered at controlled rates. Correct placement helps provide nutrients near the developing roots without direct contact between concentrated fertilizer and the seed.

A corn planter places individual seeds at controlled distances. It is suitable for corn, maize, soybean and other crops that require precise plant spacing.

A seed drill usually distributes smaller seeds continuously along the row. It is commonly used for wheat, barley, grass and similar crops.

For compacted land, the field can first be loosened with a subsoiler. A plough or disc harrow may then be used for primary soil preparation, followed by a rotary tiller for fine seedbed preparation.

After the soil surface is prepared, the 2BYF corn planter can complete planting and fertilizer application. A row crop cultivator can later be used for inter-row weeding, soil loosening and ridging.

• 2-row to 6-row configurations available
• Planting and fertilizer application in one operation
• Adjustable row spacing and seed spacing
• Mechanical ground-wheel-driven seed metering
• Suitable for corn, maize, soybean and sorghum
• Three-point mounted tractor connection
• Replaceable seed plates and wearing parts
• OEM color and logo customization

• Tractors and agricultural implements from one supplier
• Model selection according to tractor specifications
• Complete soil preparation and planting solutions
• OEM color and logo support
• Seed plates and wearing parts supply
• Export packaging and international shipping
• Experience serving customers in Africa and South America

The 2BYF series shown on this page is designed for tractors from approximately 20HP to 80HP. Final matching depends on the number of rows, machine weight, soil conditions and tractor lifting capacity.

Yes. The planter has separate seed and fertilizer systems and can complete planting and fertilizer application during the same operation.

Yes. The planting units can be repositioned along the main frame according to the required row spacing and machine configuration.

Yes. Seed spacing can be changed by adjusting the seed-metering transmission or selecting the appropriate metering configuration.

Yes. The machine can plant soybean when equipped with a suitable seed plate and correctly adjusted seed-metering system.

The standard mechanical seed and fertilizer metering systems are normally driven by the planter ground wheels, so tractor PTO power is generally not required.

Yes. BSM can provide different row quantities, row spacing, seed plates, hopper configurations, color and logo according to customer requirements.

Yes. BSM can recommend a tractor and planter combination according to the number of rows, field size, soil conditions, crop type and destination country.

For fine seedbed preparation before planting, customers can select the BSM 1GQN series rotary tiller.

For breaking compacted layers before land preparation, the BSM 3S series tractor subsoiler is available.

For inter-row cultivation, weeding and ridging after crop emergence, customers can choose the BSM 3Z row crop cultivator.

Please provide the tractor model, tractor horsepower, required number of planting rows, row spacing, crop type, seed size, planting depth, fertilizer requirement, farm area, destination country and purchase quantity.

BSM will recommend a suitable 2BYF corn planter configuration and provide a factory quotation.